弾性力学研究室での外国人留学生の博士号取得者
   弹性力学研究室里拥有博士学位的外国留学生
   Foreign students with doctoral degree in Elastic Mechanics laboratory

野田研究室の外国人留学生の博士号取得者である18名を紹介します。
以下将介绍野田研究室里的18名博士留学生。
Below are the 18 foreign students with doctoral degree from Noda Lab.



肖陽氏 (2009年9月博士号取得)

2004年に私は中国の大連理工大学から修士卒業して、最初私費で日本に一度留学しました。2005年に野田先生の伝えで文部科学省の奨学金を受けて再度日本に留学に来ました。今は最初の私費留学はいい経験になったと思っています。

・ 私は、緩み止めや応力集中緩和に関する特別工夫されたボルトについて研究を行い、博士学位を取得しました。
・ その後、2009年10月~2010年3月まで九州工業大学で博士研究員として研究を続けました。
・ 現在、北九州市の戸畑にある株式会社フジコーで働いております。

2004年,我毕业于中国大连理工大学硕士课程,并首次在日本自费留学。 2005年,我获得了文部科学省的奖学金,并再次回到日本留学。现在我认为最初自费留学是一次很好的经历。

·我的研究是关于一种专门用于松动预防和应力集中缓和的特制螺栓,并获得了博士学位。
·之后,我从2009年10月到2010年3月继续在九州工业大学担任博士研究员。
·目前我在北九州市戸畑的Fujiko株式会社工作。

In 2004, I graduated from Dalian University of Technology in China and studied in Japan for the first time at private expense. In 2005, I received a scholarship from the Ministry of Education, Culture, Sports, Science and Technology, and came back again to Japan to study. Now, I think that the first time I studied abroad was a good experience.

・ My study was about a bolt that was specially designed for loosening prevention and stress concentration relaxation, and I obtained a doctoral degree.
・ After that, I continued my research as a postdoctoral researcher at Kyushu Institute of Technology from October 2009 to March 2010.
・ Currently I work at Fujiko Co., Ltd. in Tobata, Kitakyushu City.


下村学長から博士号の学位証授与   左、肖陽氏。右、野田先生。


Hendra氏 (2010年9月博士号取得)

2006年10月に私はIndnesiaから文部科学省奨学生として日本に留学しました。

・ 私は、大型円筒セラミックス構造物における熱応力や機械的な応力の低減に関する研究を行い、博士の学位を取得しました。
・ 現在、Bengkulu大学で働いております。

2006年10月,我作为文部科学省的奖学金得主从印度尼西亚来到日本留学。

·我对于大型圆柱陶瓷结构中的热应力和机械应力的减少进行研究,并获得了博士学位。
·我目前在明古鲁大学工作。

In October 2006, I studied in Japan as a MEXT scholarship student from Indonesia.

・ My study was about the reduction of thermal stress and mechanical stress in large cylindrical ceramic structures and I obtained a doctoral degree.
・ I am currently working at Bengkulu University.


博士号の学位証授与   左から、佐野支援研究員、石川工学部長、野田教授、Hendra氏、松永学長


張玉氏 (2011年9月博士号取得)

2007年10月に私は中国の中国農業大学の修士課程を修了して、文部科学省奨学生として日本に留学しました。今は日本での留学は、文化の違いや語学を学ぶ上でいい経験になったと思っています。

・ 私は、任意の材料組み合わせにおける接着層端部ならびに界面き裂の特異応力場の強さに関する研究を行い、博士の学位を取得しました。
・ 現在、中国石油大学の教授として勤めています。

2007年10月,我在中国农业大学完成硕士学位,并获得MEXT奖学金前往日本留学。我认为在日本留学是学习文化差异和语言的好经验。

·我研究了任何材料组合中粘合剂层边缘和界面裂纹的特异应力场强度,并获得了博士学位。
·目前我是中国石油大学的一名教授。

In October 2007, I completed a master's degree at the China Agricultural University and studied in Japan as a MEXT scholarship student. I think studying in Japan is a good experience for studying cultural differences and languages.

・ I studied the strength of the singular stress field at the edge of the adhesive layer and the interface crack in any material combination, and obtained a doctoral degree.
・ Currently, I am a professor at the China Petroleum University.


中央左、野田教授。中央、松永学長。中央右、張玉氏。他、弾力研究室一同。  
左、張玉氏。右、高石氏。


栗文彬氏 (2012年3月博士号取得)

2008年8月私は産学連携研究員として日本に来ました。経済産業省のプロジェクトに参加して、高品質自動車めっき鋼板用セラミックス製ロールの開発を行いました。 このプロジェクト終了後、2010年4月に博士後期課程に入学しました。

・ 私は、焼嵌め接合からなる大型円筒セラミックス構造物の強度設計及び解体に関する研究を行い、博士学位を取得しました。
・ 現在、Romaxに就職しています。

2008年8月我作为产学合作研究员来到日本。参与了经济产业省项目,并开发用于汽车电镀钢板的优质陶瓷辊。完成这个项目后,我于2010年4月进入了博士后期课程。

·我研究了由热压接合组成的大圆柱陶瓷结构的强度设计和解体,并获得了博士学位。
·我目前在Romax工作。

I came to Japan in August 2008 as an industry-university collaboration researcher. I participated in a Ministry of Trade and Industry project to develop a high-quality ceramic roll for automotive plated steel sheets. After completing this project, I entered the doctoral program in April 2010.

・ I studied the strength design and dismantling of large cylindrical ceramic structures consisting of shrink-fit joints, and obtained a doctoral degree.
・ I am currently working for Romax.


米本教授から博士号の学位証授与  
栗氏


蘭欣氏 (2012年6月博士号取得)

2008年7月に私は山東大学の修士課程を修了して、2008年8月に文部科学省奨学生として日本に留学しました。

・ 私は、任意の材料組み合わせを考慮した縁界面き裂の応力拡大係数に関する研究を行い、博士学位を取得しました。

2008年7月,我在山东大学完成了硕士课程,并于2008年8月作为MEXT奖学金得主前往日本留学。

·我的研究是关于考虑过任意材料的组合后,边界界面裂缝的应力扩大系数,并获得了博士学位。
·我目前在山东大学工作。

In July 2008, I completed the master's program at Shandong University, and in August 2008 I studied in Japan as a MEXT scholarship student.

・ I studied the stress intensity factor of edge interface cracks considering any combination of materials and obtained a doctoral degree.
・ I am currently working at the Shandong University.
・ 現在、山東大学で働いております。


          
松永学長から博士号の学位証授与
  左、野田教授。中央、松永学長。中央左、蘭氏。


デディ・スルヤディ氏 (2015年9月博士号取得)
博士論文題目:Strength Analysis and Coming out of Steel Shaft for Ceramic Roller Used in the Furnace under Both Thermal and Distributed Loads (鋼製軸と焼嵌接合された加熱炉用セラミックローラーにおける接合部の強度と軸の抜け外れに関する研究)

陳鑫氏 (2015年12月博士号取得[ダブルディグリー])
博士論文題目:Analytical and Experimental Study on Anti-Loosening Performance and Fatigue Life Improvement for Bolt-Nut Connections Having Pitch Difference (ピッチ差を有するボルト・ナット締結体における緩み止めと強度に関する解析的及び実験的研究)

王鐸鋒氏 (2016年9月博士号取得)
博士論文題目:Debonding Strength evaluation for Bonded Axi-symmetric Bodies in Terms of Intensity of Singular Stress (特異応力場の強さに注目した異種材料接合軸対称体の構造強度評価に関する研究)

李戎氏 (2017年3月博士号取得)
博士論文題目:Adhesive Strength Evaluation Method Focusing on the Intensity of Singular Stress Field to Minimize Bend Effect for Single Lap Joint(特異応力場の強さに注目した接着強度評価法と単純重ね合わせ継手の曲がりの影響の解消)

胡可軍氏 (2017年3月博士号取得)
博士論文題目:Study on Residual Stress for Hot Strip Rolling Bimetallic Rolls during the Heat Treatment Process(圧延用複合ロールの熱処理における残留応力に関する研究)

任飛氏 (2018年9月博士号取得)
博士論文題目:Analysis of Intensity of Singular Stress Field for Cylindrical and Three-Dimensional Butt Joints in Comparison with Two-Dimensional Model (3次元突合せ継手の特異応力場の強さの解析と2次元モデルとの比較)

張国偉氏 (2019年9月博士号取得)
博士論文題目:Mechanism Clarification of Coming out of the Shaft from Shrink-Fitted Ceramic Sleeve Roller under Bending Load Focusing on the Driving out Force (抜け出し駆動力に注目した曲げ荷重を受けるセラミックスリーブ式焼き嵌めローラーの軸抜け出しメカニズムの解明)

Pedro Galvez氏 (2019年9月博士号取得)
博士論文題目:Joints of dissimilar materials with elastic adhesives

陳棟氏 (2020年9月博士号取得)
博士論文題目:Study on Intensity of Singular Stress Field at the Fiber Entry Point in Pull-Out Test and Micro-Bond Test Used for Fiber Reinforced Composites(繊維強化複合材料の引抜試験とマイクロボンド試験における繊維入口部に生じる特異応力場の強さに関する研究)

劉渓氏 (2020年9月博士号取得)
博士論文題目:ピッチ差を有するボルト・ナット締結体のねじ込みと締め付けの3次元有限要素法解析(Three-dimensional finite element analysis of screwing and tightening process of bolt and nut connections with slight pitch difference)

BIN ARIDI Mohd Radzi氏 (2021年9月博士号取得)
博士論文題目:Fatigue Failure Analysis of the Bimetallic Work Roll in Four-High Rolling Mill(4段式圧延機用複合ワークロールにおける圧延応力解析と疲労強度評価)

王彪氏 (2021年9月博士号取得)
博士論文題目:How to Improve both Fatigue Strength and Anti-loosening Performance of Pitch Difference Nut(ピッチ差付きボルト・ナット締結体における疲労寿命向上と緩み防止性能向上の両立)

ABDUL RAFAR Rahimah Binti氏 (2022年3月博士号取得)
博士論文題目:Analytical and Experimental Study for Interfacial Slip in Shrink-Fitted Bimetallic Work Roll(焼嵌め型スリーブ組立式ロールにおける界面すべりに関する解析的及び実験的研究)